Toll Free Help Line: 0800 222 423
Product has been added to your cart.
VIEW CART

PRODUCTS

Non-Slip Walk Safe

Walksafe is a twin pack polyurethane non slip coating suitable for correctly primed Concrete, Screed and Plywood Surfaces where the surface has less than 10% moisture measured with Maxidoser Hygrometer. Walksafe is not conducive to floors with a hardness less than 25mpa or over tiles of any sort. Walksafe is available in standard Grey and Black but can be overcoated in any colour Unymarine. The coverage of walksafe is 1-1,5m2/l and is best applied by airless spray with a 6mm Graco nozzle for even dispersing of 5mm rubber pellets. Walksafe is not a waterproofing coating but can be used as a non slip coating in showers, ramps and other slippery areas to reduce the risk of falls.
Floor | Polyurethane
BUY NOW

Hydrolock Primer

Hydrolock Primer is a 2-component water based epoxy. Hydrolock Primer is a rapid curing, water based primer consisting of two components; a pre-reacted epoxy resin dispersed in water (Part A) and a waterborne modified polyamine solution (Part B).
Epoxy | Primer | Waterproof
DATASHEETBUY NOW

Polyurethane Floor Coat

A ready to use quick drying glossy enamel, designed for application to various substrates, (new and old), based on an Urethane Alkyd binder. Polyurethane floor coat is hard-wearing and easy to clean, is easy to repaint at any stage of life when re-coating becomes necessary.
Floor | Polyurethane
DATASHEETBUY NOW

Acri 700

A finish coat based on acrylic resin which dries by evaporation of the solvents. It has excellent adhesion properties, weathering resistance and gloss and colour retentio. Food grade coating recommended for catering industry and can be applied directly to concrete surfaces.
Concrete | Floor | Food Grade
DATASHEETBUY NOW

Epicon Marine Finish

Epicon Marine Finish, based on a combination of epoxy resin and polyamide curing agent, has high-build excellent durability and adhesion properties. It is suitable system for the external hulls and decks of steel ships, bridges and other steel structures.
Marine | Steel
DATASHEETBUY NOW

Unymarine

Unymarine, based on polyurethane resin, has excellent gloss retention, durability and chemical resistance, etc. Unymarine is recommended as a glossy finish and is suitable for protection of concrete floors. It is suitable for protection of outside of superstructure of steel ships.
Concrete | Marine | Steel
DATASHEETBUY NOW

Dekro Alkyd Stoep Enamel

Alkyd Stoep Paint is a ready to use quick drying glossy enamel designed for application to various substrates, (new and old) based on an alkali resisting oleo-resinous binder.  Designed to give a hard-wearing glossy coating over new or previously painted surfaces.
Enamel | Floor
DATASHEETBUY NOW

Polyurethane Floor Coat

Polyurethane floor coat is a ready to use quick-drying glossy enamel, designed for application to various substrates, (new and old), and based on a Urethane Alkyd binder. Designed to give a hard-wearing glossy coating over new or previously painted surfaces.
Enamel | Floor
DATASHEETBUY NOW

Epicon T-500

EPICON T-500, a high build type epoxy coating, has excellent physical properties such as adhesion, toughness, abrasion resistance, etc. as well as chemical resistance to salt-water, fresh water, petroleum products, crude oil, alkalis and weak acids.
Epoxy | Marine
DATASHEETBUY NOW
keyboard_arrow_up