Silicon 400
SILICON No.400 SILVER, is a silicon resin aluminium paint based on silicon resin and aluminium pigment.
Heat Resistant | Silicon
Send us an enquiry and we will get back to as soon as possible.
Need more info about this product?
Product Description
- It can be applied directly on to bare steel or existing paint film such as Acrylic, chlorinated rubber and epoxy.
- It has also good workability and it is possible to obtain thick coat especially by spray application.
- Acrylic anti-rust primer
Recommended Use:
- Anti-rust primer on the ship’s topside, superstructure.
Other products in this category
Vinyl AC-HB
VINYL AC-HB, based on vinyl chloride resin and aluminium pigment, provides an effective protection against corrosion.
Solvent
Bannoh 500R
BANNOH 500, is a multi-purpose primer, which gives excellent physical properties such as toughness, abrasion resistance and adhesion, etc., and has excellent flexibility, resistance to water and cathodic protection. It is suitable for most areas of ship.
Epoxy | Primer
Epicon Zinc Rich Primer HB 2
EPICON ZINC HB-2, a high-build anti-corrosive paint, based on a combination of zinc-ASTM D520 II epoxy resin and hardener, is quick drying and gives excellent protection of steel against salt water and water.
Primer | Steel
Non-Slip Walk Safe
Walksafe is a twin pack polyurethane non slip coating suitable for correctly primed Concrete, Screed and Plywood Surfaces where the surface has less than 10% moisture measured with Maxidoser Hygrometer. Walksafe is not conducive to floors with a hardness less than 25mpa or over tiles of any sort. Walksafe is available in standard Grey and Black but can be overcoated in any colour Unymarine. The coverage of walksafe is 1-1,5m2/l and is best applied by airless spray with a 6mm Graco nozzle for even dispersing of 5mm rubber pellets. Walksafe is not a waterproofing coating but can be used as a non slip coating in showers, ramps and other slippery areas to reduce the risk of falls.
Floor | Polyurethane
Hydrolock Primer
Hydrolock Primer is a 2-component water based epoxy. Hydrolock Primer is a rapid curing, water based primer consisting of two components; a pre-reacted epoxy resin dispersed in water (Part A) and a waterborne modified polyamine solution (Part B).
Epoxy | Primer | Waterproof
Polyurethane Floor Coat
A ready to use quick drying glossy enamel, designed for application to various substrates, (new and old), based on an Urethane Alkyd binder. Polyurethane floor coat is hard-wearing and easy to clean, is easy to repaint at any stage of life when re-coating becomes necessary.
Floor | Polyurethane
Seagrandprix 660HS
SEA GRANDPRIX 660 HS is a tin free antifouling paint with self polishing action in service and long protection against marine oganisms.
Marine | Steel
Seagrandprix 1000
SEA GRANDPRIX 1000 is a tin free self polishing antifouling paint based on the specific polymer with highly hydrolysis activity. Excellent antifouling effect is derived from the highly active polymer which ensures maximum effectiveness and leaching of the biocides.
Marine | Steel
Seagrandprix Plus
SEA GRANDPRIX FBX PLUS is a copper free self polishing antifouling paint based on the specific polymer with highly hydrolysis activity.
Marine | Steel
Umeguard SX
Umeguard SX is a surface tolerant, modified epoxy paint. It gives adhesion physical properties such as adhesion, toughness and abrasion resistance, etc. and chemical resistance to water, salt water and crude oil. Umeguard SX is recommended for cargo hold, Inside and outside of accommodation space, Void space, Cofferdam, Engine room, Pipe line, Other steel structure, etc.
Epoxy | Marine
Acri 700
A finish coat based on acrylic resin which dries by evaporation of the solvents. It has excellent adhesion properties, weathering resistance and gloss and colour retentio. Food grade coating recommended for catering industry and can be applied directly to concrete surfaces.
Concrete | Floor | Food Grade
Epicon Marine Finish
Epicon Marine Finish, based on a combination of epoxy resin and polyamide curing agent, has high-build excellent durability and adhesion properties. It is suitable system for the external hulls and decks of steel ships, bridges and other steel structures.
Marine | Steel
Unymarine
Unymarine, based on polyurethane resin, has excellent gloss retention, durability and chemical resistance, etc. Unymarine is recommended as a glossy finish and is suitable for protection of concrete floors. It is suitable for protection of outside of superstructure of steel ships.
Concrete | Marine | Steel
Dekro Alkyd Stoep Enamel
Alkyd Stoep Paint is a ready to use quick drying glossy enamel designed for application to various substrates, (new and old) based on an alkali resisting oleo-resinous binder. Designed to give a hard-wearing glossy coating over new or previously painted surfaces.
Enamel | Floor
Polyurethane Floor Coat
Polyurethane floor coat is a ready to use quick-drying glossy enamel, designed for application to various substrates, (new and old), and based on a Urethane Alkyd binder. Designed to give a hard-wearing glossy coating over new or previously painted surfaces.
Enamel | Floor
Epicon T-500
EPICON T-500, a high build type epoxy coating, has excellent physical properties such as adhesion, toughness, abrasion resistance, etc. as well as chemical resistance to salt-water, fresh water, petroleum products, crude oil, alkalis and weak acids.
Epoxy | Marine
Epicon T-800
EPICON T-800, a high-build type phenolic epoxy coating, has excellent physical properties such as adhesion, toughness, abrasion resistance, etc. as well as chemical resistance to salt-water, fresh water, petroleum products, crude oil, alkalis and weak acids.
Epoxy | Marine
Dekro Tuffcoat
Tuffcoat is a surface tolerant epoxy coating, designed to protect steel with less surface preparation. Tuffcoat requires less surface preparation (St 2) and sandblasting is not necessary. It has excellent adhesion and can be applied to a slightly damp surface.
Concrete | Epoxy | Waterproof