Hydrolock Primer

R250.00R1,038.94 inc. VAT

Hydrolock Primer is a 2-component water based epoxy.

Hydrolock Primer is a rapid curing, water based primer consisting of two components; a pre-reacted epoxy resin dispersed in water (Part A) and a waterborne modified polyamine solution (Part B). In its wet mixed state, it is milky green and slightly viscous.

DOWNLOAD DATA SHEET

SELECT PRODUCT OPTIONS
Clear
Non-Slip Walk Safe
Polyurethane Floor Coat

Need more info about this product?

Send us an enquiry and we will get back to as soon as possible.

By enquiring you agree to our Privacy Policy and we’re offering you chance to join our newsletter.

Description

  • Hydrolock is a rapid curing, water based primer consisting of two components; a pre-reacted epoxy resin dispersed in water (Part A), and a waterborne modified polyamine solution (Part B). In its wet mixed state, it is milky green and slightly viscous.
  • Hydrolock is suitable for use on most sound and eroded building surfaces where both a penetrative and surface-lying effect is needed.
  • Substrates include concrete (including damp and partially cured cementitious renders, screeds and mortars, bituminous surfaces (eg asphalt), roofing felts, insulation foams, wooden protrusions, previously painted surfaces, glass reinforced polyester and many existing Hygiene solution membranes prior to re-coating.
  • The product’s rapid curing properties allow faster contract completion and consequent savings on site/labour costs.
  • Furthermore, because the epoxy component is pre-reacted, it constitutes the lowest hazard form of epoxy systems currently available.

Additional information

Weight N/A
SIZE

1L, 5L

Correct surface preparation is essential for good product performance and all surfaces should be prepared as per the standard Dekro Preparation Specifications.

  • Do not apply when ambient temperatures are <4°C or >40°C.
  • After correct surface preparation, prime Hydrolock Primer by brush, roller or spray at the specified spread rate as per technical data.

IMPORTANT: Walls (cement plaster, concrete or masonry) must be dry before painting and should not exceed a moisture content of 10% as measured with a Protimeter Surveymaster Moisture Meter or equal. The ambient temperature must be between 4oC and 40oC and humidity between 10% and 85%.

Excessive application thickness and/or rapid drying could lead to mud cracking.
Avoid applying under adverse weather conditions as this could result in poor product performance.
Work from corner to corner, or from a natural cut off point to another.
Do not attempt touch ups, but redo complete panels.

Always keep a wet edge and avoid downing tools during the application process to prevent lap marks and variances in colour or texture.
To ensure consistent appearance ensure that the batch numbers on all containers used are the same. Where batch numbers on containers differ, intermix containers before use.

Other products in this category

Brushes, rollers, accessories & supplies

Click here for everything you will need to get the job done!

How-to-guides & expert tips

Click here for how-to-guides, videos & tips for every scenario.

Menu
ONLINE PRODUCT PRICESPLEASE NOTE

All product prices displayed on this website are valid for online purchases only and may differ from prices in store.