Send us an enquiry and we will get back to as soon as possible.
Need more info about this product?
Product Description
- Excellent adhesion to ferrous metal, galvanised iron and various types of plastic (acting as key-coat).
- Single pack, no elaborate catalyst mixing ratios to observe.
- Good film strength, providing a resilient film for over coating.
- Free from toxic materials
- Improves corrosion resistance of industrial coating systems.
Other products in this category
Metallic Zinc Rich Primer
Metallic Zinc Rich Primer is a general purpose zinc primer for the temporary protection of suitably prepared steel structures.
| Primer
Flexi Coat
This product can be used as a primer and topcoat in one. • Excellent adhesion to various metals. • Suitable for a wide range of industrial structures. • Exterior coating. • UV resistant. • Anti-corrosive coating. • Resistant against wide range of chemicals. • Direct-to-metal application
Enamel | Wood
Standard Aluminium
Ready mixed leafing aluminium paint. General purpose high lustre aluminium. Protective coating for iron, steel, wood and other surfaces. Improves illumination. Reflects heat.
Sanding Sealer (Clear)
Sanding Sealer is a Nitro Cellulose Sealer for natural wood or veneers where a clear coating is desired in order to enhance the natural beauty of wood grain.
Sealer | Wood
Uresheen Enamel
High quality, drip-less, silky sheen enamel. Superb appearance, even flow and sheen.
Enamel
Eggshell Enamel
High quality Eggshell Enamel for interior use. Superb appearance with a uniform eggshell gloss, good build and opacity.
Enamel
Non-Slip Walk Safe
Walksafe is a twin pack polyurethane non slip coating suitable for correctly primed Concrete, Screed and Plywood Surfaces where the surface has less than 10% moisture measured with Maxidoser Hygrometer. Walksafe is not conducive to floors with a hardness less than 25mpa or over tiles of any sort. Walksafe is available in standard Grey and Black but can be overcoated in any colour Unymarine. The coverage of walksafe is 1-1,5m2/l and is best applied by airless spray with a 6mm Graco nozzle for even dispersing of 5mm rubber pellets. Walksafe is not a waterproofing coating but can be used as a non slip coating in showers, ramps and other slippery areas to reduce the risk of falls.
Floor | Polyurethane
Wash Primer
Commonly referred to as Wash Primer. Main use is over well prepared Galvanised Iron Aluminium, Non-ferrous Metal or PVC.
Cleansing | Plaster | Primer
Dekroguard
Dekroguard is a water repellent oil based coating containing wood preservatives.
Varnish | Waterproof | Wood
Dekro Polyurethane Varnish
Single Pack Polyurethane Varnish, which is supplied in Gloss, Eggshell or Matt finish.
Sealer | Varnish | Wood
Dekro Spar Varnish
Dekro Spar Varnish is a general-purpose glossy, durable coating that protects woodwork in preference to polishing or oiling.
Gloss | Sealer | Varnish | Wood
Dekro Timbertek
Timbertek is a single pack siliconised permeable varnish, dries to a semi gloss, flexible coating.
Sealer | Varnish | Wood
Zinc Phosphate Primer
U.Q.D. Zinc Phosphate is a cost saving Grey metal primer. The primer performance characteristic is its excellent adhesion to clean bare metal.
| Primer
Hydrobond 44
Hydrobond 44 is a water based anti-corrosive and rust-inhibiting coating. It provides excellent protection for iron and other metal surfaces in corrosive-industrial environments. It also assists in inhibiting or preventing corrosion, under rusting and rust-creep and is easily applied onto inaccessible areas, where maximum preparation is not possible.
Primer | Waterproof
Dekro Tuffcoat
Tuffcoat is a surface tolerant epoxy coating, designed to protect steel with less surface preparation. Tuffcoat requires less surface preparation (St 2) and sandblasting is not necessary. It has excellent adhesion and can be applied to a slightly damp surface.
Concrete | Epoxy | Waterproof
Adthane Enamel
Adthane Enamel is a Polyurethane (Twin Pack) coating. Adthane Enamel, because of its outstanding properties, can be applied to a wide variety of substrata – plaster, polyester, wood, metals and plastics after correct priming, where outstanding performance is required.
Concrete | Enamel | Wood
Pure Velvet
Dekro Pure Velvet is a premium quality interior/exterior velvet coating, with a low sheen finish which is highly washable, stain resistant and has excellent durability and high opacity.
Antifungal | Concrete | Eco-friendly | Plaster
Non Drip Enamel
Dekro Non Drip Enamel is a non-yellowing water based interior/exterior enamel which is highly durable and washable which dries to an attractive low sheen (satin) finish.
Antifungal | Eco-friendly | | Wood