Galv-etch

R180.13 – R883.05 inc. VAT

Galv-Etch is an acid / detergent solution, designed to etch new galvanized surfaces simultaneously with the emulsification of surface contaminants i.e. prefabricators protective coating. Galv-Etch requires a wet reaction period of 10 – 15 minutes before rinsing clean.

DOWNLOAD DATASHEET

SELECT PRODUCT OPTIONS

Metallic Zinc Rich Primer

Need more info about this product?

Send us an enquiry and we will get back to as soon as possible.

Description

Supplied ready for use.
Surfaces should be hosed or washed with clean water to remove heavy dust and grit deposits. Galv-o-Clean must be worked well over the surface.
Once cleaning is complete, the surface should be thoroughly washed with water to remove residues left by the Galv-Etch.
Galvanised steel surfaces must be checked that they are in fact water-break free after cleaning.
The Galv-o-Clean treatment must be repeated on areas which may have been missed during the initial cleaning operation after conducting a water-break test.

Additional information

Weight	N/A
SIZE	5L, 25L

Galv-o-Clean may be applied by mop, profile fitting felt or old brush, activating the contaminants.
The use of Scotchbrite pad in conjunction with Galv-o-Clean facilitates easier abrasive action and improves key. Rinse thoroughly all residues.
Galv-Etch may be applied by mop-swab or brush.

Rubber gloves recommended to protect hands.
Not suitable for ferrous surfaces.