How-to Guides
- Suitable roller and tray
- 67-100mm good quality brush
- Extension pole
- External/Internal Crack filler
- Turpentine to clean brushes used for solvent based primers.
- Dekro Masonry Primer – Spread Rate of 5-6m2 per litre depending on porosity of surface.
- Dekro Super Fibretex – Spread Rate of 6m2 per litre per coat (External surface only)
- Dekro Hydrosilk – Spread Rate of 9m2 per litre per coat (Internal or External surfaces)


1.
Apply one coat of Dekro Masonry Primer to all cut out cracks and imperfections and allow drying for ± 8 hours.

2.
Apply one coat of Dekro Masonry Primer to all cut out cracks and imperfections and allow drying for ± 8 hours.

3.
Apply one coat of Dekro Masonry Primer to all cut out cracks and imperfections and allow drying for ± 8 hours.

4.
Apply one coat of Dekro Masonry Primer to all areas (full prime), and allow to dry for ± 8 hours.

5.
Apply two coats of your preferred Dekro Acrylic coating and allow 4 -6 hours drying time in-between coats.
If your walls are smooth, reckon on covering 8-10 square metres with a litre of matt or satin sheen paint. Always check the coverage information on the data sheet as different types of paint have different spreading capacities. Dekro Paints can give expert advice on colour schemes and what types of paint to use.We can also save you money by calculating quantities. Tell us the measurements of the areas you want to cover, the types of surfaces and their condition. All this information will make calculations a lot easier.
Always purchase more paint than you require as colour differences may occur when using different batches of paint.
Products
Dekro Hydrosilk
Dekro Super Acrylic
Dekro Masonry Primer
